Core Sensor line set

Description

Line set for Core Sensor 2, 3, 3s and pro bars. Back lines can be fit with a 2m hydbrid line section. Selected line length is measured from the bar to the end of the pigtails, actual line sections are shorter and the same as original Core lines for that given total line length. For example a 22m line set has 17.20m upper front lines and 20.55m back lines.
Upper front lines are sleeved to protect against wear from the Y-split connection rings.

Our Hybrid lines are a mix of wear-resistant sk76 lines at the bottom section of the lines (where the back lines grind over the front lines) and sk99 lines for the rest of the lines to give you the ultimate mix of stiff, strong and thin lines that outlast all other line sets!
Not only is the replaceable bottom section made of wear-resistant Dyneema sk76, we also splice the first 2m of the hybrid line sections. This gives the lines extra thickness where it matters the most and you have to wear through the entire outer layer before the strength of the line is compromised.

Bottom section of the back lines is 2m and the lower front line section is 6m long to let the bar travel along the front line far enough to completely flag out before it stops at the loop-loop transition between the sk76 and sk99 sections

Choose between a combination of sk99 550kg (1.68mm), sk99+ 425kg (1.54mm), sk99 300 (1.15mm) or sk90 330 (1.3mm) lines. Thicker lines are stronger and have less stretch at the cost of drag, so a rule of thumb is to pick thicker lines if you are heavy or ride overpowerd and thinner for lighter riders or when foiling/wave riding

We use the highest quality Braidtech Sk99 lines to give you you strongest and most responsive lines available.